Changing the cartridge

Picture
Step One: Loosen the knob.
 

                       

Picture
Step Two: Pull back the tray.
 

                                                       

Picture
Step Three: Remove the knob on the handle side and place securely on the table.  Don't misplace the nylon washer.

                                                           

Picture
Step Four: Remove the cartridge by lifting up and away from the body.  

                                      

Picture
Step Five:  Place the new cartridge in position lining up the base and the handle so it fits squarely in the slot.  Turn the handle to see if the cutters turn to verify it is seated correctly.

                                                     

Picture
Step Six:  Replace the knob on the handle side making sure to put the nylon washer over the screw before you tighten it. Push the tray back into position and tighten the knob.  Cut wool!